|
Model
|
Production capacityt/h
|
Matching power kw
|
Dimensions mm
|
||||
|
LQJ-2
|
1-2
|
2.2
|
2280×1030×1600
|
||||
|
LQJ-5
|
2-5
|
4
|
2600×1030×1750
|
Cold core removing machine is composed of transmission reducer, bearing seat, frame, feed hopper, transmission roller, separation plate, hopper, core hopper and other components. Working principle: The material enters the core removing workshop from the hopper, and the fruit pulp is separated from the core due to the separation plate with different angles placed on the roller in the core removing room. The separated pulp falls into the hopper from the screen hole, and the fruit core is composed of a spiral composed of several separation plates, which moves to the core and is discharged from the core bucket. The gap between the screen and the separation plate can be processed according to the size of the material core.
Use and Maintenance
1, installation must be firm, and keep the frame level.
2. Before starting the machine, check whether the screws in each part are fastened.
3. Check whether the lubricating oil of the transmission reducer is normal. (Please refer to the operation manual of reducer for details)
4, clean the machine inside and outside, check whether the rotating part of the machine is flexible.
5. Switch on the transmission reducer power source, check whether the rotation direction is consistent with the rotation indicator and run for 2 minutes, confirm the same sound and other conditions before feeding.
6, feeding should be uniform feeding, do not impact. Stones, screws and tools are strictly prohibited to fall into the equipment.
7, if in the process of use is found to be dirty, through the operation of the control gate at the entrance to control the size of the entrance and through the transmission reducer speed control hand wheel drive roller speed to adjust the situation of dirty core. After good adjustment, the next use, no need to adjust.
8, stop, directly cut off the reducer power supply.
9, after stopping, be sure to clean the machine inside and outside to keep it clean.
10. Regularly check whether the bearings and reducer are well lubricated, and regularly add the specified lubricating oil.
