|
Model
|
Production capacity t/h
|
Matching power kw
|
Dimensions mm
|
||||
|
PS-LZ-1.5
|
0.3-1.5
|
6.2
|
1650×540×1920
|
||||
|
PS-LZ-2.5
|
1-2.5
|
17.2
|
2100×640×2200
|
||||
|
|
|
guavacrushing juicer consists of hammer, screen, main shaft, body and other parts. It consists of hopper, crushing device, front bracket, screw, filter screen, juice container, rear bracket, slag tank and other components. The left end of the screw rod is supported in the rolling bearing seat, and the right end is supported in the handwheel bearing seat. The motor drives the screw through the V-belt pulley.
The working principle of the guava crushing juicer: the main part of the equipment is the crushing device mounted on the hopper, and the rotor has four sets of flying knives and one set of bottom knives. The flying knife rotates around its own axis in the fixed gap between the bottom knives, so that the fruits and vegetables are crushed into a particle size of 2-5 mm, and directly enter the screw juicing system to improve the juicing effect. The main ingredient in spiral juicers is the spiral. The diameter of the bottom of the screw gradually increases along the direction of the slag opening, and the pitch gradually decreases. When the material is pushed by the screw, the volume of the screw cavity is reduced, forming the extrusion of the material.
